主题
WePanel FAQ
WePanel is the glass panel engine of the WeSim cockpit system. Check this page first for usage issues; for basic operations see the WePanel User Manual.
Panel window is blank or black after mirroring
- Make sure DirectX 12 is enabled in MSFS 2020/2024 (DirectX 11 mode is not supported by WePanel capture)
- The aircraft hasn't fully loaded: wait a few seconds after entering the cockpit
- Popped out immediately after switching aircraft: WePanel is rebuilding panel data — wait for the message to disappear and retry
- Still black after all the above: restart WeSim and try again; if the issue persists, check the status bar message and contact support
"Panel data not ready, please retry later"
Panels are still loading — this is normal. Wait a few seconds and retry; if it doesn't recover after a long time, re-enter the cockpit (or reload the aircraft) and retry.
"No instrument panels detected (aircraft loading or not in cockpit)"
WePanel found no panels to mirror. Common causes:
- Not in the cockpit yet (still in the menu/loading screen)
- The aircraft doesn't support panel capture (a few third-party aircraft don't expose their rendering interface)
- The aircraft was changed mid-flight
Enter the cockpit, wait for panels to appear, then retry.
"Port conflict, please restart your PC"
A system resource issue prevented the WePanel service from starting. Restart the PC to recover.
After switching aircraft, old panels remain / images scrambled
After switching aircraft, WePanel automatically invalidates old panel data and rebuilds. If you see leftover old images:
- Close all panel windows (Close All button) and pop them out again
- If it still misbehaves, restart WeSim
Touch doesn't respond on the touchscreen
- Make sure it's a mirrored window (not a regular pop-up window)
- Make sure the mirrored window is on the touchscreen
- A few special instruments (WASM-based third-party panels) do not accept external touch commands for security reasons — use a mouse or physical keys for those panels
Do A320 MCDU / B737 CDU support touch?
MCDU / CDU are standalone hardware devices using a dedicated data-driven solution: WeSim reads data from the simulator and sends it to the device over a USB cable, and the device firmware renders the display — no screen mirroring and no touchscreen needed. The physical keys on the device are the most authentic way to operate them.
Can't view the LAN shared screen
- Make sure the viewing device and the PC are on the same LAN
- Make sure the address format is correct:
http://<PC-IP>:18998(e.g.http://192.168.1.100:18998; the port is fixed at 18998) - Find the PC's IP in Windows network settings; company/guest networks may isolate devices — try a home network or a phone hotspot
Panel window can't be dragged / wrong position
Panel windows support free dragging and resizing. If a window is mispositioned, edit the left/top/width/height values in the panel list on the Popout Panel page and pop it out again.
Panel windows didn't close when quitting the simulator
WeSim closes all panel windows automatically when it exits. If a window is left over, close it manually — it won't affect next use.
More questions
- When contacting support, please include: simulator version, aircraft model, and the status bar message
- Logs: runtime logs in the WeSim installation directory (support will guide you through providing them when troubleshooting)